074880 / 074880-0001-000
Sperry Marine
Refurbished
| Manufacturer / brand | Sperry Marine (Northrop Grumman branding on the Rev F label) |
|---|---|
| Manufacturer location on Rev L label | Hamburg, Germany |
| Equipment type | Analogue gyrocompass bearing repeater |
| Condition | New |
| Rev F | Type 5016 · STO No. 074880 |
| Rev L | Type 5016-0000-00 · STO No. 074880-0001-000 |
The Type 5016 repeats heading received from a compatible shipboard heading system on an analogue compass card. At a designated bearing station, bridge personnel can use the repeated heading with the appropriate sighting device to take visual bearings. The repeater relies on the vessel’s heading source and distribution equipment. Check the source selection when comparing readings across stations.
| Display | Circular graduated compass card with a fixed reading reference |
|---|---|
| Card diameter | 172 mm, as referenced in Sperry Marine’s PV 23 bearing-device documentation for Type 5016 |
| Illumination controls | DIM− and DIM+ keys visible in the overall photograph |
| Installation | The overall photo shows a gimbal and bracket. Match the fitted stand, bracket or terminal arrangement to the vessel drawings. |
The overall image illustrates the face and mounting arrangement. Confirm the exact hardware included with the revision you are ordering.
The Northrop Grumman Sperry Marine label reads Type 5016, STO No. 074880 and Rev F. Quote these three identifiers together when requesting a replacement for an installed Rev F unit.
The Sperry Marine label reads Type 5016-0000-00, STO No. 074880-0001-000 and Rev L. The complete stock number, including its suffix, is important for checking the configuration.
Match the stock number and revision, heading source, supply and signal interface specified in the vessel drawings, connector or terminal box, mounting hardware and any required bearing device. The manufacturer-hosted NAVIGAT 100 system certificate lists the 074880-0001-xxx family as a bearing repeater in specified arrangements. Verify the exact system configuration before using that reference to select a unit.
If the card is stationary or differs from the master heading, record the affected station and compare it with the master and other repeaters. Have the vessel’s technician verify heading source selection, local power and data connections against the installation drawing. If the card moves correctly but is difficult to read, check the dimmer setting and note any illumination fault. Follow the vessel’s procedures and the manufacturer’s service instructions before opening the housing or returning the station to service.
Which revision should I request? Send the full nameplate or quote the exact STO number and revision of your installed repeater.
What information is required for a quote? Include the gyro or heading system model, connector and bracket photos, the revision required, quantity and delivery city or country.
Short description. New Sperry Marine Type 5016 analogue gyro bearing repeater with Rev F and Rev L identifiers listed for replacement matching.
SM MARINE SERVICE™
DT Road, Pahartali, Chattogram, Bangladesh
info@smmarineservice.com · WhatsApp +8801818929292
www.smmarineservice.com
0
BDT 0
BDT 0
BDT 0
BDT 0
Marine Equipment Supplier