AVENTICS R414003637
AVENTICS
New product
AVENTICS R414003637 Solenoid Valve Spare Kit – Marine Spare Parts and Replacement Supply
Product Information
Product Introduction
SM MARINE SERVICE™ offers AVENTICS R414003637 pneumatic valve spare kits for marine and industrial maintenance requirements. The supplied photographs show Emerson and AVENTICS branding, the material number R414003637 and the designation CCVA-CUS-VALVE-SPARE.
This part is relevant to buyers sourcing a specific pneumatic valve assembly or replacement component for an existing control system. Because the designation includes CUS, the assembly may be customer-specific. Buyers should verify the original equipment manufacturer's part number, installation dimensions, pneumatic connections and electrical characteristics before ordering.
What Is the AVENTICS R414003637 Valve Spare Kit?
The R414003637 is identified on the supplied label as a valve spare with the type designation CCVA-CUS-VALVE-SPARE. It is associated with AVENTICS pneumatic components, a product range within Emerson's automation portfolio.
A solenoid-operated pneumatic valve uses an electrical command to control compressed-air flow. Depending on its configuration, a valve can direct, admit or exhaust air to operate a pneumatic actuator or control mechanism. The precise function of this customer-specific assembly must be checked against the vessel's original documentation.
The supplied product information describes a 3/2-way, normally open configuration and a 24 V DC coil. These details should be verified against the original assembly and applicable technical documentation before the valve is put into service.
Main Features
Technical Specifications
| Parameter | Available Information |
|---|---|
| Brand | AVENTICS / Emerson |
| Material Number | R414003637 |
| Type | CCVA-CUS-VALVE-SPARE |
| Valve Function | Reported as 3/2-way, normally open; confirm before installation |
| Coil Voltage | Reported as 24 V DC; verify against the coil |
| Country of Origin | Hungary, according to the packaging |
| Document Reference | RA54254242_001 |
| Pneumatic Port Sizes | Not confirmed |
| Operating Pressure Range | Not confirmed |
| Flow Capacity | Not confirmed |
| Exact Engine or System Model | Not confirmed |
Do not select a replacement based on voltage or general valve function alone. Confirm pressure requirements, port arrangement, mounting, sealing, electrical connection and the original system specification.
Main Components and Kit Contents
The supplied product information identifies the following expected kit contents:
Confirm the actual contents of each package before purchase. The coil and electrical connector should also be checked against the original equipment requirements. No unverified dimensions, pressure ratings or flow values are stated here.
Marine Applications
Depending on the original system configuration, pneumatic solenoid valves may be used in:
These are general application categories, not confirmation that R414003637 fits every system listed. The exact engine, machinery manufacturer and installation remain unconfirmed.
Common Problems and Troubleshooting
The following are general diagnostic checks for pneumatic solenoid valves. They are not confirmed failure reports or manufacturer-specific fault codes for R414003637.
1. Valve Does Not Actuate
Check the control command, supply voltage, coil connection and relevant electrical protection. Verify the specified voltage from the original documentation before testing.
2. Pneumatic Actuator Does Not Respond
Check compressed-air availability, isolation valves, supply pressure, tubing and downstream equipment. Confirm that the valve's port arrangement matches the circuit.
3. Air Leakage
Inspect external fittings, seals, O-rings and mounting surfaces. Replace seals only with suitable parts and follow the applicable service procedure.
4. Intermittent Operation
Inspect electrical connections, cable condition, coil condition and air-supply stability. Isolate the equipment safely before inspection.
5. Replacement Valve Does Not Fit
Compare the material number, mounting dimensions, pneumatic ports, electrical connector and system configuration. A similar-looking valve may not be an approved substitute.
For safety-critical shipboard systems, troubleshooting and replacement should be performed by qualified personnel under the vessel's approved procedures.
Common Alarms and Fault Messages
No verified R414003637-specific alarm codes or fault messages have been established for this article. Any alarm displayed by the host machinery or control system should be interpreted using that system's own manual and fault-finding procedure.
Maintenance Tips
Never dismantle or test a pressurised assembly without following the applicable safety procedures.
Spare Parts and Replacement Availability
SM MARINE SERVICE™ can assist buyers looking for AVENTICS R414003637 valve spare kits, subject to stock confirmation.
Reported Inventory
The visible unused-stock manufacturing-date codes include 23W04, 24W32 and 24W44. The used stock is reported as dating from 2018–2019. These dates describe the supplied inventory information and do not establish operating history or remaining service life.
New, used, refurbished, reconditioned or tested-working equipment can be sourced where available. Availability of each condition is subject to confirmation. Do not assume that used stock has been tested unless a specific inspection or test record is provided.
Why Correct Valve Identification Matters
Customer-specific pneumatic assemblies may differ in port configuration, mounting, coil characteristics, seals and operating requirements. Installing a visually similar but incompatible valve can cause incorrect operation, air leakage, control failure or equipment downtime.
Before ordering, send SM MARINE SERVICE™ the material number R414003637, photographs of the original component and label, and the machinery manufacturer and model. If available, provide the relevant parts-list reference or drawing number.
Frequently Asked Questions
What Is AVENTICS R414003637?
It is a pneumatic valve spare assembly identified by the label designation CCVA-CUS-VALVE-SPARE.
Who Manufactures R414003637?
The packaging identifies AVENTICS and Emerson. The specific original equipment application has not been confirmed.
What Voltage Does the Valve Use?
The supplied information specifies 24 V DC. Confirm the coil label and original system documentation before installation.
Is R414003637 a 3/2-Way Normally Open Valve?
The supplied product information describes it as a 3/2-way, normally open valve. Verify this configuration against the original technical documentation before use.
Is the Exact Engine Model Known?
No. The engine or machinery model is not confirmed. Compatibility must be checked against the original installation.
Are AVENTICS R414003637 Spare Kits Available?
The supplied stock information reports four unused sealed kits and four used ex-vessel units. Confirm current availability before ordering.
Can I Buy Unused and Used Units?
Both conditions are reported in the supplied inventory. Contact SM MARINE SERVICE™ to confirm the quantity, condition, photographs and price of the required unit.
Can SM MARINE SERVICE™ Ship Worldwide?
Worldwide shipping can be arranged, subject to stock confirmation, destination and shipping requirements.
Where Can I Obtain the Manual or Datasheet?
Request the relevant documentation using material number R414003637 and reference RA54254242_001. No verified direct PDF manual link is included in this listing.
Short Product Description
AVENTICS / Emerson R414003637 (CCVA-CUS-VALVE-SPARE) pneumatic valve spare kit for replacement and maintenance requirements. SM MARINE SERVICE™ reports four unused sealed units and four used ex-vessel units, subject to stock confirmation. The supplied information specifies 24 V DC; confirm the original equipment configuration before ordering. Worldwide shipping available on request.
User Manual and Technical Resources
Request the applicable AVENTICS technical documentation, spare-parts information and compatibility confirmation using the following details:
No unverified manual, datasheet or external download link is provided. Confirm the correct document and revision with the manufacturer or original equipment supplier.
SM MARINE SERVICE™
Marine Automation & Navigation Equipment Supplier
Available Conditions
Stock Locations
Services
Contact Information
SM MARINE SERVICE™
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: www.smmarineservice.com
0
BDT 0
BDT 0
BDT 0
BDT 0
Marine Equipment Supplier